t
9. Fasten the handle (1) and the
thermometer (2) to the upper part (6)
of the large grill chamber using two
M6 x 15 mm screws and two M6 nuts.
6
10. Put the back support legs (16+19)
together and the front support legs
(20+22) together. Ensure that the
holes for mounting the rack grille (21)
are on the inside.
19
22
30
P140207-TEPRO-1088N_Natchez_20151214.indb 30
11. Hang the hooks of the rack grille (21)
into the holes on the inside of the
support legs. Stick the wheel axle (18)
through the lower holes on the right
side of the support legs. Place the
wheels (17) on the ends of the axles
1
and fasten the wheels using two M12
nuts.
2
21
12. Fasten the cross braces (15) to the
support legs using eight M6 x 15 mm
screws. Do not yet tighten the screws.
16
15
20
18
17
17/12/15 11:26 AM