Maintenance - TECNOINOX PF70G7 Gebrauchs- Und Installationsanleitung

Part 4
Only qualified personnel should replace faulty parts. Prior to
commencing any kind of work, disconnect the unit from the gas
distribution network and the electrical power supply.
Only order spare parts from the manufacturer or an authorised reseller.
The unit must be cold to clean it.
Keeping the appliance clean is very important for a long and trouble-free
working life.
The removable parts should be washed separately with warm water and
detergent, then rinsed in running water.
The steel parts may be cleaned with a damp cloth and with a non-
abrasive detergent and then dried by using a soft, dry cloth. For very
resistant stains, use hot water and vinegar.
Do not use harsh or abrasive detergents to clean the stainless steel
parts. Iron cleaning pads should not be used as they cause the formation
of rust. For the same reason, avoid contact with ferrous materials.
Turn the electric power off or make sure you have turned the burner of
the oven of before doing any work on it. Let the oven cool down and
clean it thoroughly with a damp cloth and warm water using a non-
abrasive detergent (or with the special products readily available for
cleaning ovens). Do not use abrasive cloths or pads or other products
that could irreparably damage the enamel. Normal cooking temperatures
The appliance needs no specific maintenance besides normal cleaning; we do however suggest having it checked once a year by the assistance
centre for which, we recommend drawing up a maintenance contract.
REMEMBER THAT THE APPLIANCE:
Must never be left unattended when it is being used!
When the unit is switched on, its surfaces get very hot so please
take great care!
The appliance is intended for professional use and therefore only
qualified personnel should use it!
Installation as well as any conversion or adaptation to a different
type of gas must be carried out in accordance with current laws and
only by qualified and authorized personnel.
Our appliances are studied and optimised, with lab tests, to provide high
performance and yields. However, to keep energy consumption low
(electricity, gas and water), we suggest not using the appliance for any
length of time if it is empty or in conditions that compromise optimum
yield.
All packaging materials are environment-friendly. They can be kept
without problem or burnt in a waste incinerator plant. The plastic
components that can be recycled are:
Polyethylene: external packaging material and/or pluribol film
Polypropylene: straps
Replacing parts
After having removed the control panel, all the functional parts of the
appliance are easily accessible
Cleaning and care of the appliance
When cleaning, avoid using abrasive paper or cloth; instead and only in
special cases you can use pumice stone powder; we recommend using
sponges (ex. Scotch) to remove stubborn deposits. You can also use
common sprays for cleaning ovens and grills to remove stubborn
deposits. If spray products are used, follow the manufacturer's
instructions.
The enamelled parts should not be cleaned with abrasive or acid
products. Avoid using steel wool or metal pads for cleaning.
It is important to clean the oven each time you use it; this way it will be
easier to remove cooking residues and avoid burning them the next time
the oven is used, which would also result in a bad smell.
To minimise the emission of polluting substances in the environment we
suggest cleaning the appliance with products that are at least 90%
biodegradable.
Cleaning inside the oven
help transform grease and oil splashes into a mist of residual dust that
can be easily removed at the end of the cooking process when the oven
has cooled down by simply using a damp sponge. We recommend
heating the oven periodically to the maximum temperature so that the
residual dust can be removed once it has cooled down. Be careful not to
damage the thermostat sensor inside the oven while you are cleaning it.

Maintenance

Safety precautions
Ecology and environment
At the end of the appliance's useful life, dispose of it properly.
90% of each appliance is made of metal (stainless steel, iron, aluminated
sheet, etc.) hence it can be recycled by the relative recycling
organisations in compliance with the standards in force in your country.
GB / IE - 6
At least once a year have the appliance checked by qualified
personnel.
FIRE!
In the case of fire, close the shut-off cock to cut off the gas supply
immediately, then use a suitable fire extinguisher to fight the fire.
Polystyrene foam: corner pieces, sheets and protection blocks.
Prepare the appliance for disposal, so it cannot be used any
more, by removing the power cable and any locks so that no
one can get locked inside accidentally.
Maintenance and cleaning
5410.265.04