Aastra 5370 Kurzanleitung Seite 5

Resetting Call Forwarding
Select then
M
ENU
/ .
R D
ESET ELETE
Deflecting a Call During the Ringing Phase
1. Press
D
EFLECT
2. Enter the call number and press
Transferring During a Call
1. Press the Call key or
number and wait until the called party answers.
2. Press the
C
ONNECT
no-one answers, cancel with
3
and take back the first call.
R
ECOVER
Brokering
Switches between two callers without interrupt-
ing the calls. You are making/taking a call:
1. Press
E
NQUIRY CALL
wait until the call is answered.
2. Press the
B
ROKERING
between the callers.
Conference Call
Connects several callers for a conference call. You
are making/taking a call:
1. Press
E
NQUIRY CALL
wait until the call is answered.
2. Press the
C
ONFERENCE
3. Add other callers using
Leaving a conference call: Press the End key.
Callback
The person is busy or does not answer:
.
B
ACK
Resetting activated features
You can deactivate again all the call forwardings
and other temporarily active functions: Press
>
M A
ENU CTIVATED
the function you want.
D
ELETE
Installation and Connection
You can set up the phone either at a 40° or a 25°
angle:
1. Insert the footstand as indicated on the instal-
lation diagram until it snaps into place.
2. Plug in the handset and phone cords and feed
them through the cable holders.
3. Insert the expansion key module
Aastra M530⁄M535
ing, snap it into place and plug in the connec-
tion cable and power cord if required.
Downloaded from www.Manualslib.com
>
A F
CTIVATED EATURES
during the ringing phase.
2
OK
, enter the call
E
NQUIRY CALL
; the call is transferred. If
E
ND CALL
, enter the call number and
to switch back and forth
, enter the call number and
.
E
NQUIRY CALL
> and
F S
EATURES ELECT
2
as indicated in the draw-
manuals search engine
Notes
> • Some function commands of the vocal
S
ELECT
announcements
minal.
• Always disconnect the phone from the mains
first before you connect/disconnect an
.
Aastra M530⁄M535
• Always install the footstand before you plug in
the cables.
• Always remove the cables before you detach
the footstand.
2
/
Connections
1
again.
or
C
ALL
Document Designation
• Document number: eud-0988 / 1.0
• Valid upwards: Ascotel® IntelliGate® I7.7 / Aastra
5000 R5.1
R /
ESET
• © 01.2008
Declaration of Conformity, User's Guide and oth-
er documents can be found at
http://www.aastra.com/docfinder
http://www.aastra.com
3
are not to apply on this ter-
2
expansion key module.
Connecting to the IP network
(Aastra 5370ip only)
Connecting the PC
(only Aastra 5370ip)
Connecting the power supply
(Aastra 5370ip only)
Telephone connection cable
(Aastra 5370 only)
Connecting the handset
Connecting the headset
Connection Aastra M530⁄M535
pansion key module or power supply
Connecting the Aastra M530⁄M535
expansion key module
Connection power supply or
2
Aastra M535 expansion key module
2
3
.
2
ex-
2