Cleaning And Maintenance; Troubleshooting - TaoTronics SoundLiberty 94 Bedienungsanleitung

• Tap the Touch Control on the left
Turn On/Off
earbud twice to turn on/off Ambient
Ambient
mode
Mode
• Single Earbud Mode: Ambient Mode
ON (default)
Couple Earbuds Mode:
Tap and hold the Touch Control on the
Turn On / Off right earbud for 2 seconds
Voice Control Single Earbud Mode:
Tap and hold the Touch Control on the
earbud for 2 seconds
Clear Pairing
Refer to the "Clear Pairing List" section
List
Go into Pairing
Refer to the "Pairing" section
Mode
Successfully
paired with
/
your device
Bluetooth out
of Range /
/
Failed to pair
with your device
Note: Only when you are wearing the earbuds can you hear the voice prompt.
09
1. Clean the earbuds and the charging case on a regular basis.
Ambient Mode
2. Use dry and soft cotton cloth to wipe the unit.
Note: Do not insert anything into the product.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.
Toot
/ No. Problem
1
Pairing
2
Connected
3
Disconnected
4

CLEANING AND MAINTENANCE

TROUBLESHOOTING

Solution
Failed to turn on the
Earbuds low battery, please charge them
earbuds
• Place the earbuds into the charging
Failed to charge the
case properly
earbuds
• Make sure the charging case is fully charged
Can't charge the Make sure the charging cable is intact
charging case and plugged in properly
The earbuds reconnected with previously
paired device automatically:
Can't find
• Deactivate the Bluetooth function of
"TAOTRONICS
previously paired device or clear
SoundLiberty 94"
"TAOTRONICS SoundLiberty 94" from
in the Bluetooth device
its Bluetooth device list, and then
list
search again
• Put the device to be connected close to
the earbuds
10