Fahrrad-Computer-Fehlermeldungen - PIVOT cycles SHUTTLE Benutzerhandbuch

Fahrrad-Computer-Fehlermeldungen

• Wenn das System ein Problem entdeckt, können auf dem Display
des Fahrrad-Computers Fehlermeldungen erscheinen.
• Bleiben Probleme auch nach Ausführung der Lösungsvorschlägen
bestehen, wende dich an den Verkäufer deines Bikes.
CODE
A system abnormality was detected in
E010
the drive unit
E01000 -
A sensor abnormality was detected in the
E01004
drive unit
E01010 - A sensor abnormality was detected in the
E01011 drive unit
E01020 -
A sensor abnormality was detected in the
E01022
drive unit
A sensor failure was detected in the drive
E01030
unit
E01040 -
A malfunction was detected in the drive
E01042 unit
E01050 -
A sensor failure was detected in the drive
E01051
unit
E013, E034 An abnormality was detected in the drive
& E03400 unit's firmware
An abnormal vehicle speed signal was
E014
detected from the speed sensor
E020 & A communication error between the bat-
E02000 tery and drive unit was detected
Battery connected to the drive unit is not
E021
supported
The battery connected does not conform
E022
with system standards
An electrical failure was detected inside
E023
the battery
The battery does not recognize the drive
E025
unit
Shifting unit installed differs from unit
E030
configured in system
Current firmware is not supported by this
E033
system
E035 & An abnormality was detected in the
E03500
vehicle settings
Part of the system firmware may be cor-
E043
rupted
Error caused by system configuration
E044
E050 & An abnormal vehicle speed signal was
E05000 detected from the speed sensor
www.pivotcycles.com
ISSUE
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
No system functions will
start
No system functions will
start
No system functions will
start
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
Power assistance is not
provided during riding
info@pivotcycles.com
OPERATIONAL
RESTRICTION
Turn the power off and back on again.
Contact the place of purchase.
Contact the place of purchase.
Contact the place of purchase.
Contact the place of purchase.
Contact the place of purchase.
Contact the place of purchase.
Connect to the E-Tube Project app and
restore or update the firmware.
Check that the speed sensor is correctly
positioned.
Check that the cable between the drive
unit and battery is properly connected.
Turn the power off and back on again.
Turn the power off and back on again.
Turn the power off and back on again.
Confirm the drive unit is compatible. Check
the power cord for damage.
Update shifting configuration in E-Tube
Project app.
Connect to the E-Tube Project app and
update the firmware.
Connect to the E-Tube Project app to check
if the settings and vehicle status differ.
Contact the place of purchase to restore
the system firmware.
Contact the place of purchase.
Check that the speed sensor is correctly
positioned.
FEHLERBEHEBUNG
REMEDY
1.877.857.4868 11