Fitting - Elite SANREMO Universal Bedienungsanleitung

FITTING

Rear support
Fit the quick fastener (fig. 2). It can be fitted on
the right or left as required. With the Allen key
supplied, clamp the rear support with the bottom
support, placing the carry-all bar (fig. 3, 4 and 5)
between the two components. Tighten the bolts
until complete clamping.
Front support
Fit the front support with the end with key facing
either forwards or backwards according to your
needs or the positioning of the carry-all bars. With
the antitheft key, completely open the cover of the
front support and, with the Allen key supplied,
clamp the rear support with the bottom support,
placing the carry-all bar (fig. 6, 7, 8 and 9) between
the two components. Make sure the front support
is properly aligned with the rear support. Tighten
the bolts until complete clamping.
Fig.2
Fig.3
Fig.4
Fig.5
GB
Fig.6
Fig.7
Fig.8
Fig.9
13