OrCam Read Erste Schritte Seite 6

Vocal Commands.
OrCam vocal commands can be used to easily control your OrCam
Read, change settings, and receive information.
To use them:
1.
Rapidly press the trigger button twice. You will hear a long beep.
2.
Say the vocal command. You will then hear a chime.
3.
OrCam Read will then tell you the information, change the setting,
or ask you for more information in order to change the setting.
To hear the list of vocal commands, say one of the following
commands:
"Help Tell"
- OrCam Read will list all of the available commands that begin with
"Tell".
- These commands will help you receive general information (such
as the time or date) or information about the device (such as the
software version or device serial number).
"Help Settings"
- OrCam Read will list all of the available commands that will help
you modify your device's settings.
"Help Smart Reading"
- OrCam Read will list all of the available commands for the
Smart Reading feature.
Audio Settings Menu Options.
Customize your OrCam Read's settings via the audio settings
menu. There are two options for entering the audio settings
menu:
04.
- Rapidly press the trigger button twice and say after the long
beep, "Enter the user menu".
- Press and hold down the power button, press any of the volume
buttons, and then release the power button.
Once you are in the audio settings menu, pressing the trigger
button once confirms the selected option; pressing either of the
volume buttons browses through the options. Rapidly pressing
the trigger button twice either makes the device go back to the
main menu or exits the audio settings menu.
Complete List of Settings Options and Commands.
For the complete list of settings options, OrCam Please
commands, and vocal commands, visit the online User Manual
on the OrCam website's User Area.