6. Cleaning and maintenance
6.1 Safety instructions for cleaning
o Before cleaning and repairs, disconnect the appliance from the socket (disconnect
the plug) and let it cool down.
o Do not use corrosive cleaning agents and ensure that water does not enter the
appliance.
o To protect against electrical shock do not immerse the appliance, cord or plug in
water or other liquids.
ATTENTION!
The appliance is not suitable for spraying directly with a water jet. Therefore do
not use a pressure water jet to clean this appliance.
6.2 Cleaning
o Clean the appliance regularly.
o Before cleaning, turn off the appliance by pressing the
(disconnect the plug).
o Let the appliance cool down.
o Then wipe with a cleaning agent or with a squirt of dishwashing liquid in water.
All commercially available cleaning agents which are approved for household
use can be used for cleaning.
o Do not use abrasive cleaners which can scratch the surface of the combination
plates.
o Never scrape the coated surface of the combination plate with a knife, fork, metal
spatula or other sharp object (the coating may be damaged).
o All housing parts are made of stainless steel and can be treated with a
commercially available stainless steel cleaning agent.
o Do not use sharp objects, steel wool or similar.
o Do not clean the joint between the frame and the combination plate with sharp
objects.
o After cleaning, use a soft cloth for drying and polishing the surface.
key and disconnect it
- 33 -