Troubleshooting - Prozis Funky Handbuch

USB Charging Port
1. Connect the USB charging
cable included to recharge
the speaker.
AUX-in Port
2. Plug in a 3.5 mm audio
cable.
Operating the speaker in AUX-in mode
If you are using an iPad, MP3/MP4 player or any other mobile phone that
does not connect to the speaker wiressly, you can use an audio cable.
• Plug one end of a 3.5 mm audio cable to the speaker or line-out jack on
your player and plug the other end of the cable to the AUX-IN jack of the
speaker.
• Switch on the external audio source and play your music.
• Press the power button once to switch to AUX IN mode. The LED
indicator will flash white every 2 seconds.
• Press and hold the power button to switch off the speaker when you're
finished listening. The LED indicator will flash in white very quickly and
the speaker will return to BT mode again.

TROUBLESHOOTING

Some issues that may arise can be solved by the user. If the problem persists
after having tried the following solutions, please contact Prozis customer
service.
EN
10