Connection Of The Water Pipe To The Refrigerator - Blomberg KFD 9952 XA+ Bedienungsanleitung

Water connection to the
refrigerator
Please follow the instructions
below.
Downloaded from www.Manualslib.com manuals search engine
Connection of the Water
Pipe to the Refrigerator
1. After installing the union onto the
water pipe, insert the water pipe to
the refrigerator inlet valve by pressing
downwards firmly.
2. Fix union as seen in the opposite
figure, by squeezing by hand on the
refrigerator inlet valve.
(a- Water Pipe, b-Union, c-Valve)
C Note 1: You should not need to
tighten the union with a tool to achieve
water tight assembly. In case of a leak
use a spanner or a pair of pliers to
tighten the union.
To fit the water filter follow the
instructions below referring to figures
supplied:
14
EN
a
a
b
2
1
c