Sony WLA-NWB1 Bedienungsanleitung Seite 15

– Install this unit and Bluetooth device as
near to each other as possible.
– If this unit is used within about
10 meters (about 30 feet) of a wireless
LAN device, turn off the wireless
LAN device.
 W e do not take any responsibility
for leakage of information during
Bluetooth communication.
 Connection with all Bluetooth devices
cannot be guaranteed.
– A device featuring Bluetooth
function is required to conform to
the Bluetooth standard specified by
Bluetooth SIG, and be authenticated.
– Even if the connected device
conforms to the above mentioned
Bluetooth standard, some devices
may not be connected or work
correctly, depending on the features
or specifications of the device.
 Depending on the device to be
connected, communication may take
some time.
On safety
 Do not drop, hit, or otherwise expose
the unit to strong shock of any kind.
This could damage the product.
 Do not disassemble or attempt to open
any parts of the unit.
On placement
 Do not place the unit in any of the Do not place the unit in any of the
following locations.
– Direct sunlight, near a heater, or Direct sunlight, near a heater, or
other extremely high-temperature
location
– Dusty location Dusty location
– An unsteady or inclined surface An unsteady or inclined surface
– Location exposed to large amounts
of vibration
– Bathroom or other high-humidity
location
– In a car subject to the direct rays of
the sun
Notes on using in a car
Do not attempt to connect this unit, or
to operate this unit, an audio output
device or a car radio while driving or
waiting at a traffic signal.
Cleaning
Clean the unit with a soft, dry cloth,
or a soft cloth lightly moistened with
a mild detergent solution. Do not use
any type of solvent, such as alcohol
or benzene, which may damage the
finish.
Others
If you have any questions or problems
concerning this unit that are not
covered in this manual, please consult
your nearest Sony dealer.
1
GB