Troubleshooting; Possible Cause; Service Data - Zanussi ZSG25224 Benutzerinformation

Troubleshooting

WARNING!
Refer to Safety chapters.
What to do if...
Problem
The appliance does not
operate.
The appliance does not
operate.
The appliance does not
operate.
The appliance does not
operate.
The lamp does not oper-
ate.
There is sparking in the
cavity.
There is sparking in the
cavity.
The turntable set makes
scratching or grinding
noise.
The appliance stop to
operate without a clear
reason.

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
30
Downloaded from www.Manualslib.com

Possible cause

The appliance is deactivated.
The appliance is not plugged in.
The fuse in the fuse box is blown.
The door is not closed properly.
The lamp is defective.
There are metal dishes or dishes with
metal trim.
There are metal skewers or aluminium
foil that touches the interior walls.
There is an object or dirt below the
glass cooking tray.
There is a malfunction.
We recommend that you write the data here:
manuals search engine
Activate the appliance.
Plug in the appliance.
Check the fuse. If the fuse blows
more than one time, contact a quali-
fied electrician.
Make sure that nothing blocks the
door.
The lamp has to be replace.
Remove the dish from the appliance.
Make sure that the skewers and foil
does not touch the interior walls.
Clean the area below the glass cook-
ing tray.
If this situation repeats call the Au-
thorised Service Center.
The necessary data for the service centre is on
the rating plate. The rating plate is on the
appliance. Do not remove the rating plate from
the appliance.
........................................
........................................
........................................
Remedy
www.zanussi.com