Safety Precautions - Stihl Smart Connector Gebrauchsanleitung

The STIHL Smart Connector is equipped
®
with a Bluetooth
operating restrictions (for instance, in
aircraft or hospitals) must be observed.

2 Safety Precautions

Intended use
The STIHL Smart Connector, in
combination with the App, enables the
personalization and transmission of product
running time data on the basis of
®
Bluetooth technology. The STIHL Smart
Connector can be used in the rain.
WARNING
￭ Using the Smart Connector other than for
its intended use can result in serious
injuries and damage to property.
► Always use the Smart Connector as
described in this Instruction Manual,
the App and under https://
connect.stihl.com/.
► Do not use the Smart Connector as a
toy. If using the Smart Connector near
children: supervise the children.
￭ Batteries not approved by STIHL for the
Smart Connector can cause fires and
explosions. This can result in serious
injuries or death and damage to property.
► Use an IEC-CR2032 lithium button cell
approved for use in a temperature
range from - 30 °C to 60 °C.
Use
WARNING
￭ Parts that are not in a safe condition
cannot function properly and safety
devices can be disabled. People can be
seriously injured or killed.
► Use the Smart Connector with the
cover closed.
► Make sure that the sealing ring is in the
guideway between the housing and the
cover.
8
radio interface. Local
► Close the cover so that the arrow
symbol points toward the dot symbol
on the housing.
► Do not mount the Smart Connector on
handles, switches, controls, protective
devices, cooling air ducts, moving
parts or safety information labels.
► Do not mount the Smart Connector in
areas exposed to heat or sparks.
► If using screws or rivets to fit the Smart
Connector: take care not to damage
electrical parts, cables, fuel lines or
other components.
► If using screws to fit the Smart
Connector: use a suitable drill with a
diameter of 3 mm or 4 mm as
described in the App.
► If using rivets to fit the Smart
Connector: use a suitable drill with a
diameter of 3.5 mm.
► Drill the holes from the inside of each
housing part, always when dismantled.
► If using screws to fit the Smart
Connector: tighten the screws so that
there is no play.
► If using the STIHL Smart Connector on
a STIHL product: always attach the
Smart Connector to the site described
and shown in the App and always
attach the Smart Connector in the
manner described and shown in the
App and under https://
connect.stihl.com/.
► If using the STIHL Smart Connector on
a third party product: follow the
instructions in the third party product
manufacturer's instruction manual.
Maintenance, storage and repairs
WARNING
￭ Harsh detergents, cleaning with a water
jet or pointed objects can damage the
Smart Connector. If the Smart Connector
is not properly cleaned, parts may not
0457 399 0007 A B20