Synchronized Recording Function; Tape Counter And Memory Stop - Denon DRM-595 Bedienungsanleitung

ENGLISH

SYNCHRONIZED RECORDING FUNCTION

• Convenient synchronized recording can be performed when used in
combination with a DENON CD player equipped for the synchronized
recording function.
• SYNCHRO Jack Connection connect the SYNCHRO Jack with a DENON CD
player which is equipped with a SYNCHRO jack, then make a synchronized
recording. Use the connection cord supplied with this cassette deck.
• Switch on your amplifier or receiver and the CD player.
• Set the tape Monitor switch on your amplifier or receiver to the source
position.
1. Load the tape, the disc you want to record into the CD player.
2. Following the recording instructions on page 9, set the Dolby NR mode,
and the input level.
3. Set the CD player to the stop or pause mode.
4. Press the Rec/Rec Mute button (REC/REC MUTE) (
button ( REC PAUSE) simultaneously. The cassette deck and CD player
3
are automatically set to the synchronized recording mode. The "SYNC"
indicator flashes on the cassette deck and the synchronized recording
mode is indicated on the CD player.
(For details, refer to the CD player's operating instructions.)
5. To stop synchronized recording, press the Stop button (
cassette deck and Stop button on CD player.
The synchronized recording mode is cancelled for both the cassette deck
and CD player.
6. To stop synchronized recording temporarily, press the Stop button (
STOP) on the CD player. A 5-second blank space is created on the tape,
after which the recording pause mode is set. The "SYNC" indicator flashes.
To resume synchronized recording, press the Play button (PLAY) on the CD
player.

TAPE COUNTER AND MEMORY STOP

1) Operation of the Tape Counter
(1) Press the Counter Reset button (RESET) to reset the counter to
"‚‚‚‚".
(2) By using the Play, Fast Forward or Fast Rewind functions, the reading
of the counter will change to indicate index position.
• During recording and playback operations, the counter is useful for
noting the location of existing programs or positions where recording is
to be started.
• The reading of this counter does not correspond with that of any other
deck.
2) MEMORY STOP Operation
(1) During recording or playback, the Memory Stop feature can be used to
locate a particular point on the tape. Press the Counter Reset button
(RESET) at the desired point.
(2) Then press the Counter Memory button (MEMORY), the MEMO
indicator lights.
10
) and Rec Pause
4
Notes:
STOP) on
2
Caution:
2
dB -40 -30 -20 -10 -5 -3 -1 0
L
R
MPX SYNC
REMOTE SENSOR
STOP REC PAUSE
PLAY 2 3
DIRECTION REC/REC MUTE
CD SYNCHRO REC
Caution:
If the memory stop operation is performed after repeated fast-forwarding or
rewinding, the tape may not stop at the proper position.
CD player
LINE OUT
SYNCHRO
R L
DRM-595
L
R
LINE LINE
OUT IN
• If synchronized recording is started when the CD player is in a mode other
than the stop or pause mode or when no disc is set, the "SYNC" indicator
on the cassette deck flashes and the recording pause mode is set until
synchronized recording is possible on the CD player.
• In the synchronized recording mode, only the Stop button (
function.
• Do not set the cassette deck to the synchronized recording mode when
the CD player is in the play mode. Also, do not turn off the power of the
cassette deck or the CD player during synchronized recording. Doing so
can result in malfunction.
• During the editing operation, when using the editing functions on the CD
player, be sure to select a tape with a sufficiently long recording time.
RESET
+1 +3 +5 +10
COUNTER
MEMORY
MEMO
DOLBY NR REV.MODE
B OFF C
PHONE LEVEL
PHONES
MIN MAX
(3) When the Fast Rewind button (
travel ( ), or the Fast Forward button (
reverse tape travel ( ), the tape is rapidly rewound (or advanced)
until the counter indication of "‚‚‚‚" is reached.
• The Memory Stop feature will rewind or forward the tape to within –5
counts in the forward ( ) direction (from "‚‚‚‚" to "
to within +5 counts in the reverse (
"‚‚‚fi"). After this, several seconds are required for corrective
operations.
Power supply outlet
SYNCHRO
STOP) will
2
MPX
-
) is pressed during forward tape
00
) is pressed during
11
") and
) direction (from "‚‚‚‚" to