Inhaltsverzeichnis
Werbung
SAFETY RULES
FOR OPERATIONS & MAINTENANCE
SLIDING OUT UNIT SOLDERBATH
IF THESE RULES ARE NOT OBSERVED IT CAN CAUSE PERSONAL
INJURY AND/OR DAMAGE TO THE MACHINE
HEATING ELEMENTS
IF THESE RULES ARE NOT OBSERVED IT CAN CAUSE PERSONAL
INJURY AND/OR DAMAGE TO THE MACHINE
LOCKPINS
•
REMOVE SOLDERBARS FROM SOLDER-
FEEDER
•
ALWAYS PLACE LOCKPINS (4x) WHEN
USING THE SLIDING OUT UNIT
HEATING ELEMENTS ISOLATION RESISTANCE
•
EVERY MACHINE SHIPPED FROM SOLTEC IS CHECKED
ON THE ISOLATION RESISTANCE ACCORDING TO THE
NORM EN-60204-1, WHICH IS PART OF THE CE DIREC-
TIVES.
IT IS POSSIBLE THAT A DEFECTIVE OR BAD HEATING
ELEMENT CAN CAUSE A PROBLEM WITH THE ISOLA-
TION RESISTANCE.
•
A LOW ISOLATION RESISTANCE IN COMBINATION WITH
A POOR FACTORY SAFETY GROUND CONNECTION CAN
CAUSE A HAZARDOUS SITUATION.
•
WE STRONGLY RECOMMEND TO RECHECK THE HEAT-
ING ELEMENTS ISOLATION RESISTANCE AND THE FAC-
TORY SAFETY GROUND ON A REGULAR 3 MONTHS
BASES.
Werbung
Inhaltsverzeichnis
