Laserscale BS78 Bedienungsanleitung Seite 49

2
Attach the scale clamps loosely (1 or 2 full turns looser than the semi-tightened position) by using the
mounting screws, as shown in the figure.
BS78-40N/NS/R/RS
×
M4 8
Plain washer (nominal 4)
Spacer
3
Check the mounting surface and the datum surface of the scale for dust and dirt. If the surfaces are dirty,
wipe them clean with gauze moistened with alcohol.
BS78
BS78-70N/NS/R/RS, 270N/NS/R/RS, 320N/NS/R/RS
Scale clamp
Reference plate
BS78-120N/NS/R/RS, 170N/NS/R/RS,
220N/NS/R/RS, 370N/NS/R/RS, 420N/NS/R/RS
Reference plate
Fig. 3-10
Fig. 3-11
×
M4 8
Plain washer (nominal 4)
Scale clamp
Reference plate
Mounting surface
Datum surface
9
(E)