Questions And Answers; Manual Setting; Problem Solving - Toshiba AV50 Series Handbuch

00GB_AV505D_EngOM.book Page 35 Saturday, November 24, 2007 5:53 PM
Questions and Answers
Below are the answers to some of the most
common queries.
For more information go to www.toshiba.co.uk
Q
Why is there no sound or picture?
A
Check the television is not in standby mode. Check the
mains plug and all mains connections.
Q
There is a picture, but why is there little or no
colour?
A
When using an external source, for instance, a poor
quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The
colour is factory set to Auto to automatically display
the best colour system.
To check that you have the best colour:
a
With the external source playing, select Manual
setting from the SET UP menu.

Manual setting

Colour system: Auto
EXT2 A V C R
Store
OK
Back Watch TV
MENU EXIT
b
U u
With or choose between Auto, PAL, SECAM,
NTSC 4.43 or 3.58.
Q
Why doesn't the video/DVD being played show on
screen?
A
Make sure the VCR or DVD player is connected to the
television as shown on page 7, then select the correct
o
input by pressing .
Q
Why is there a good video picture but no sound?
A
Check all lead connections.
Q
Why is there a picture but no sound?
A
Check the volume has not been turned down or that
sound mute has not been selected.
Q
Why is the VCR/DVD picture in black and white?
A
Check the correct input has been chosen, S-VIDEO or
AV. See AV connections page 31.
Q
What else can cause a poor analogue picture?
A
Interference or a weak signal. Try a different television
station. Manual fine tuning may help.
a
Select the Manual tuning menu. Highlight the station
Q
and press , then press
tuning.
b
U u
Using or adjust to get the best picture and sound.
Q
Press and then
Manual tuning
Manual fine tuning
1 I A C 22
Store
OK
MENU Back EXIT
Q
Why don't the controls on the front of the television
work?
A
Check that Panel lock is not ON.
Q
Why doesn't the remote control work?
A
Check the batteries aren't dead or inserted incorrectly.
Q
Why is there a message permanently on the screen?
A
Remove it by pressing
35

PROBLEM SOLVING

i
to select Manual fine
P
.
+2 B B C 1
Watch TV
.