Selecting An Audio/Video Source - Bosch Professional Line 3 CCD Kurzanleitung

buttons > and the ENTER button F to
control the audio/video source that is active in
the cabin. The focus of control will switch back
automatically to the cockpit approximately 10
seconds after the last button press.

Selecting an audio/video source

Selecting audio/video sources on the CCS
Selecting an audio/video source for the cockpit
03.2011
02_ProLine3_en.indd 46
Downloaded from www.Manualslib.com
46 | en Selecting functions and adjusting settings | Selecting an audio/video source
Notes
f The current focus of control is
indicated in the display ("COCK-
PIT" or "CABIN").
The focus of control will also
f
switch over to the cabin when
you select a different audio/
video source for the cabin.
Function Action
Select the radio
f Press the RADIO button I
Select the CD in the f Press the CD button I
CCD drive
Select AUX/USB f Press the AUX button I (if
Select the DVD/CD in f Press the VIDEO button I (if
the CCS drive or video
source 1 or 2
manuals search engine
necessary, several times)
necessary, several times)
Robert Bosch Car Multimedia GmbH
f You can manually return the
focus of control to the cockpit by
pressing the control knob <.
When you select the navigation
f
system as the source in the
cockpit, the focus of control will
switch to the navigation unit (see
the chapter entitled "Navigation
functions on the CCS").
Note
–
–
AUX can only selected if the
AUX input has been activated
(see the chapter entitled
"Further system settings").
You can only select USB if a
data storage medium is
connected.
You can only select video
source 1 or 2 if an external
device (e.g. a DVD, TV, or
DVC) is connected.
16.03.11 17:23