Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - Makita BO5040 Bedienungsanleitung

Exzenterschleifer
Vorschau ausblenden Andere Handbücher für BO5040:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
Polishing operation
For BO5041 only
CAUTION:
Use only a Makita genuine sponge pad, felt pad or
wool pad (optional accessories).
Always operate the tool at low speed to prevent
work surfaces from heating abnormally.
Never force the tool. Excessive pressure may
decrease the polishing efficiency and cause motor
overload, resulting in tool malfunction.
1.
Applying wax
Fig.20
Use an optional sponge pad. Apply wax to the
sponge pad or work surface. Run the tool at low
speed to smooth out wax.
NOTE:
First, wax a not conspicuous portion of the work
surface to make sure that the tool will not scratch
the surface or result in uneven waxing.
Always run the tool at low speed. Running it at high
speed may cause the wax to spatter.
2.
Removing wax
Fig.21
Use an optional felt pad. Run the tool at low speed
to remove wax.
3.
Polishing
Fig.22
Use an optional wool pad. Run the tool at low
speed and apply the wool pad gently to the work
surface.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
Downloaded from
www.Manualslib.com
manuals search engine
ACCESSORIES
CAUTION:
These
accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Hook-and-loop
type
pre-punched holes)
Hook-and-loop type sponge pad
Paper dust bag holder
(For BO5041 only)
Hook-and-loop type felt pad
Hook-and-loop type wool pad
Paper dust bag
7
or
attachments
are
Only use
accessory or
abrasive
discs
(with

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bo5041

Inhaltsverzeichnis