Gbr User Manual; Important Safety Instructions; Preparation For Work; Before The First Use - Marta MT-1039 Bedienungsanleitung

GBR USER MANUAL

IMPORTANT SAFETY INSTRUCTIONS

When using this appliance, basic safety precautions should always be followed, including the following:

Read all instructions carefully in order to avoid damage due to incorrect use and keep it in a safe place for future references.

Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.

For home use only. Do not use for industrial purposes.
 Do not immerse the appliance into water or other liquids. Do not use it in bathroom or damp places.

Close supervision is necessary when the appliance is used by or near children.
 Do not operate the appliance in case it has been damaged in any manner. Do not attempt to repair, adjust or replace parts of the appliance. Return the appliance to an authorized service center for
examination, repair or adjustment.
 Do not use the appliance for any other purposes than those described in this instruction manual.

Do not leave the appliance switched on when you do not use it.

Do not use the appliance if you have any physical or mental disability and have no any operational experience with similar technics. In such cases the user must have the operating instructions from the
person which in charge of security arrangement of the user.

Use only with the power base intended for this kettle.

Do not fill the kettle above "MAX" mark, otherwise the water may spill out through the spout during boiling process.

Do not use the kettle when it's empty or if the water is below "MIN" mark.

This appliance is intended for heating water only. Do not use the appliance to heat up other liquids, it can cause serious damage to the appliance.
CAUTION: This appliance becomes hot during use. To avoid burns, do not touch the hot surfaces and use handle to hold the kettle.

Do not open the lid during boiling process.

PREPARATION FOR WORK


Unpack the appliance and remove all packaging materials and labels.

Fill the kettle with water up to the "MAX" mark, boil and pour out. Repeat if necessary.

BEFORE THE FIRST USE

FILL UP

Open the lid by pushing opening button

Fill the kettle up below "MAX" mark and above "MIN" mark.

Close the lid.
CAUTION: don't fill the kettle up during boiling process.
SWITCH ON

Connect the device to the mains, and then push On /Off button. The device will start working with indicator light on.
5