"EE" flashing; memory anomaly.
• Anomaly in control panel data. Switch the appliance off and back on again to reset the instrument.
• If alarm persists, contact assistance department.
"dA" flashing; door open.
• Tells you that the door has been open too long. Ceases automatically when door is closed.
You can silence the buzzer announcing an alarm by pressing any button.
12.0 CONNECTION DIAGRAM
• Appendix A
• Appendix B for cabinets Fast Master
• Appendix C for remote cabinets
13.0 MAINTENANCE AND CLEANING
Routine maintenance work can be carried out by non-specialized personnel, following the instructions given
below to the letter.
Before performing any maintenance or cleaning work, disconnect the appliance from the power
mains.
13.1 CLEANING THE APPLIANCE
You can wash the inside and outside using a sponge damp with lukewarm water and neutral detergents
without chlorine content and without any other chemically aggressive component. Once you have finished
cleaning, dry with a soft, dry cloth. You are advised to apply polishing products on outer surfaces only.
Do not wash the appliance with jets of water. Do not use scouring pastes or steel wool.
Do not spray detergents on internal and external surfaces.
13.2 CLEANING THE CONDENSER
To keep the appliance working efficiently at all times, clean the condenser at regular intervals. To do this, use
a brush with soft bristles or a vacuum cleaner, being careful not to bend the aluminium fins.
The condenser features sharp edges. Wear protective gloves when cleaning.
13.3 CLEANING THE GASKETS
To prevent mold formation, is recommended the periodically cleaning of the gaskets. Use only lukewarm
water or a solution of water and baking soda. Do not use vinegar, detergents, degreasers, or acid products.
Do not use vinegar, detergents, degreasers, or acid products.
21