Product Description - Compex Fixx 2.0 Bedienungsanleitung

EN

PRODUCT DESCRIPTION

The Compex Fixx 2.0 massager helps warm up muscles before a workout, and relieve stiffness after a hard session.
® ™
Five, powerful intensity settings, paired with a high stall force, will give the intense pressure needed to relieve the
toughest spots safely and comfortably. Interchangeable tips (included) and a rotating head help tailor your massage
to the specific needs of different muscle groups. Removable and rechargeable batteries, a compact design, and quiet
motor help provide relief anywhere and everywhere.
INSTRUCTIONS
1. Before use, make sure Fixx
until the shaft stops inside the ball. Turn clockwise until ball is secured in place. The ball must be connected
prior to operating the Fixx
2. Fixx 2.0 massager turns on when battery is inserted into massager. Making sure Fixx
™
the OFF position, slide battery into battery slot by pushing battery in until you hear the tabs on each side click
into place.
3. To turn on, slide the switch on the top handle forward.
4. To switch to the desirable massage speed level, rotate the speed dial knob clockwise to cycle from one level to
the next. The speed level indicator light will show the speed level you are on.
5. To rotate the arm, press the button on the circular housing. Arm can lock into 3 different positions (0, 45, 90
degrees).
6. To remove battery, push the release tab and then pull the battery from the massager.
7. To remove ball, turn Fixx
Use antibacterial or alcohol wipes to clean ball between uses.
2.0 massager is off. Then, place the ball on to the metal shaft with slight pressure
™
2.0 massager.
™
2.0 massager off and turn ball counterclockwise and pull ball away from the shaft.
™
2
massager switch is in
™