Maintenance Plan; Cleaning; Storage; Disposal - Zipper Maschinen ZI-CRM40V-AKKU Betriebsanleitung

14.2

Maintenance plan

After each workshift:
 Check the cutting tools (tight fit, sharpness, damage)
 Cleaning the cutting tools
Once a month:
 Overall cleaning of the machine
 Check the smooth running of the wheels
14.3

Cleaning

Once a month the machine and all its parts must be thoroughly cleaned.
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution
Never use running water or a high pressure cleaner to clean the machine.
 Clean the outer parts with a damp sponge.
 Never clean the electronic parts with water!
 Check the bottom of the machine (cutting blade area and wheels) and remove the
deposits and / or residues with a brush
 Clean the outside (ventilation slots, ...) of the charging station.
14.4

Storage

 Clean thoroughly all components before storage.
 Store all components separately in a dry area at not less than -10 ° C.
 Charge the battery fully before storing.
 Store battery and charger separately from the machine
Loosen the upper and lower handle clamps and
fold the handles down as illustrated.
Avoid pinching or trapping any cables!
14.5

Disposal

Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer for
a replacement unit, the latter is obliged to exchange your old.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-CRM40V-AKKU
NOTICE
MAINTENANCE
26