Changing Cutting Tool - Zipper Maschinen ZI-CRM40V-AKKU Betriebsanleitung

14 MAINTENANCE
Unplug battery and safety switch (if equipped) before all maintenance and
settings!
Serious injury due to unintentional or automatic activation of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Clean your machine regularly after every usage – it prolongs the machines lifespan and
is a pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location
14.1

Changing cutting tool

Always wear protective gloves while working on the cutting tool. Risk of
injurie !
 Loosen the blade nut by
turning it counterclockwise
 Remove the blade nut,
spacer, blade insulator
and blade
 Replace the blade
insulator and spacer, then
thread the blade nut on
the shaft and tighten
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-CRM40V-AKKU
WARNING
NOTICE
CAUTION
MAINTENANCE
25