Herunterladen Inhalt Inhalt Diese Seite drucken

Product Information - HAWA Variofold 80 GV Montageanleitung

Für ganzglas-faltwände bis 80 kg türgewicht
Vorschau ausblenden Andere Handbücher für Variofold 80 GV:
Inhaltsverzeichnis

Werbung

HAWA Variofold 80 GV

2 Product information

Intended use
Hardware system for all-glass folding walls up to 80 kg (176 lbs.) panel weight.
Intended place of use
Dry internal areas and internal areas where condensation can occur: for instance in kitchens or bathrooms, but without any
significant occurrence of chloride.
Technical data
Maximum door weight
Maximum door height
Maximum door width
Minimum door width
Version
Glass thickness sliding door ESG
Glass thickness sliding door VSG
Both fully tempered monolithic safety glass and fully tempered laminated safety glass can be used.
All glass edges are seamed; 1 mm ( ") x 45° in the glass cutout.
Fully tempered laminated glass permissible with max. offset of 2 mm ( ") in the glass cutout.
ESG
Fully tempered monolithic safety glass with a minimum surface compression of 15,000 psi (DIN EN 12150-1)
VSG
Fully tempered laminated safety glass according to DIN EN 14449
HAWA Variofold 80 GV is always installed with a bottom guide channel.
Certificates are available for downloading at www.hawa.ch.
Article number
Articles are identified by a 5-digit number.
General notes
The document «Information» (22991) is an integral part of these planning and assembly instructions.
The operating instructions, the planning and assembly instructions and the document «Information» (22991) must be handed over to
the end user of powered systems.
Metric measurements apply - those in inches are for information only.
Retain the instructions. Replacements available from www.hawa.ch.
Risk and residual risk
The hardware does not pose a risk or residual risk.
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.
80 kg
(176 lbs.)
3
2600 mm (8'6 ")
- -
8
900 mm (2'11 ")
400 mm (1'3 ")
3
- -
4
2, 4 or 6 folding doors plus optionally 1 pivot door
5
10/12/12,7 mm ( "/ "/ "/ "), thickness tolerance ± 0,3 mm
---- -
16
2x5 ± 0,2 mm ESG
2x6 ± 0,2 mm ESG
1
---- -
16
7
---- -
16
13
15
1
---- -
---- -
- -
32
32
2
film thickness 0,38 / 0,76 / 1,52 mm
film thickness 0,38 / 0,76 mm
3
---- -
32
7/28

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis