Inhaltsverzeichnis
Werbung
Hawa Banio 40 GFE
2 Product information
Intended use
Sliding door fitting for all-glass shower enclosures
Intended place of use
Wet indoor areas and indoor areas where condensation may occur: e.g. in kitchens or bathrooms, but without noteworthy chloride
load.
Technical data
Max. weight per sliding door
Max. sliding door width
Max. sliding door height
Sliding door thickness
ESG sliding door glass thickness
ESG
Tempered safety glass according to DIN EN 12150-1
All illustrations are shown with 8 mm ( ") thick glass. The dimensions for 10 mm ( ") thick glass are shown in brackets (*).
Article number
Articles are identified by a 10-digit number.
General notes
The document "Safety notes" (22991) is an integral part of these planning and installation instructions.
The operating instructions, the planning and installation instructions and the document "Safety notes" (22991) must be handed over
to the end user of powered systems.
Metric measurements apply – those in inches are for information only.
Retain the instructions. Replacements available from www.hawa.com.
Risk and residual risk
The hardware does not pose a risk or residual risk.
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.
40 kg
(88 lbs.)
1
800 mm (2'7 ")
- -
2
5
2200 mm (7'2 ")
- -
8
8/10 mm ( "/ ")
5
13
---- -
---- -
16
32
5
13
8/10 mm ( "/ "), thickness tolerance ± 0,3 mm
---- -
---- -
16
32
5
---- -
16
13
---- -
32
7/40
Werbung
Inhaltsverzeichnis
