Operating The Walkie−Talkies; Volume Control - AUDIOLINE SLIM PMR 30 Bedienungsanleitung

4 Operating the Walkie−Talkies
Display and notation of operating sequences
Switching the walkie−talkies on/off

Volume control

Transmitting and receiving
Transmitting
12
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 14 ct/min)
Downloaded from www.Manualslib.com
Operating the Walkie−Talkies
P
a, P
b, P
[ y ]
ð
The main switch is located on the underside of each walkie−
talkie. Set the switch to ON before switching the walkie−talkie on.
aV
A beep tone is heard. The channel and code used last
time will display and the Ready LED flashes.
a V
If the walkie−talkie is to remain unused for a longer
period, we recommend you set the main switch to OFF.
If set the switch to OFF for a long time, the channel and
code will return to its default setting.
X/Y
After pressing the P button, the Transmit LED lights up.
If the P button is pressed longer than 60 seconds, a warning
signal is issued. Transmission is interrupted.
a, P, ð
Hold the walkie−talkie approx. 5 to 7 cm from your
mouth and speak at a normal volume. In order to talk to
other subscribers, the respective walkie−talkies must
be set to the same channel and CTCSS/CDCSS codes.
manuals search engine
Press the button depicted
Press and hold the button
displayed
Release the button displayed
Display indicator
Speak into the microphone
11
Switch the walkie−talkie on
Switch the walkie−talkie off
Raise or lower the volume
(16 levels)
Transmit
27