Optical S/Pdif In- And Outputs; L&R Stereo Unbalanced & Balanced Audio Outputs; L&R Stereo Rca Record Input And Outputs - swissonic USB Studio D Mk. II Benutzerhandbuch

3.4
There are two TOSLink connectors for optical S/PDIF connection.
These connectors allow you to connect S/PDIF devices such MD recorders or digital mixers
with optical cables to the USB Studio D Mk. II.
3.5
The USB Studio D Mk. II provides two types of analog output connections for you to connect
to your monitoring device, unbalanced & balanced.
These are to connect to your active monitor speakers, amplifier, or additional mixer device for
you to listen to the output from the USB Studio D Mk. II.
This output signal carries the source signal from any/all of the inputs on the front of the USB
Studio D Mk. II, or a mixed signal including the inputs on the front of the USB Studio D Mk.
II and a source from the the REC inputs on the rear panel.
3.6
Use standard stereo RCA cables to connect the REC inputs and outputs to a possible
additional (optional) recording device of choice.
This could be a DAT or MD recorder for example. The REC outputs (L&R) connect to the
inputs of your chosen recording device, while the REC inputs are used for the return signal
from your recording devices outputs. You can use the REC Inputs and Outputs as alternative
to the USB interface when you want to use the USB Studio D Mk. II without a computer. The
REC outputs will always send out the same signal that is recorded with the computer via the
USB audio interface.
Downloaded from www.Manualslib.com

Optical S/PDIF In- and Outputs

L&R Stereo Unbalanced & Balanced Audio Outputs
L&R Stereo RCA Record Input and Outputs
manuals search engine
7