Driver Installation; Windows 98Se / Me / 2000 / Xp; Mac Os X - swissonic USB Studio D Mk. II Benutzerhandbuch

5.
The USB Studio D Mk. II works as professional USB recording device with Microsoft
Windows 98 SE / ME / 2000 / XP and Apple Mac OS X. You can use the unit with any
modern audio application after driver installation and initial setup. Please follow the
instructions in this chapter.
5.1
Note: It is not recommended to connect the USB Studio D Mk. II before you install the driver.
Step 1
Under Windows 98SE or ME, you can launch the installer for the driver by launching
"Setup98ME.exe" from the included driver CD. Under Windows 2000 and XP, you need to
launch "Setup.exe" (make sure your are logged in as Administrator or with equivalent rights).
Step 2
Select your language.
Step 3
Click on "Install the driver".
Step 4
Agree to the terms of license for the driver.
Step 5
Now the installer does its job. Please follow the instructions on screen. You will be prompted
to connect your USB Studio D Mk. II to the computer. If the unit is already plugged in you
will be prompted to unplug it and then replug it again.
Step 6
There's some Windows popping up and disappearing again during installation, that's normal
Windows Plug & Play behaviour.
5.2
Because of the excellent USB audio support in Mac OS X (from version 10.2 and above), you
do not need to install a special driver to use the USB Studio D Mk. II under Mac OS X. Just
connect the unit via USB after you have turned on the power and you are ready to use it.
To control the features of the USB Studio D Mk. II, you need to install the control panel
software from the supplied CD-ROM. Just copy the MacOSX_Driver archive file from the
supplied CD to a folder of your choice on your local hard disk. Now uncompress it and copy
the included control panel application to any folder you want.
Downloaded from www.Manualslib.com

Driver Installation

Windows 98SE / ME / 2000 / XP

Mac OS X

manuals search engine
12