swissonic USB Studio D Mk. II Benutzerhandbuch Seite 15

Wavelab
When you use the USB Studio D Mk. II in MME compatible applications under Windows
such as Wavelab from Steinberg (or any other MME compatible application), you can select
the in- and output device somewhere in the audio settings inside the application.
Just select USB Audio Device for both recording and playback. In Wavelab, you can reach the
dialog shown above via Preferences > Audio Card.
Logic
Logic is the leading multichannel recording application under Mac OS X. It uses the
CoreAudio standard as most Mac OS X audio applications for recording and playback.
Launch Logic. After the software has been loaded, call Audio > Audio Hardware & Drivers
from the menu. The dialog that is displayed above will appear now. Make sure Core Audio is
checked. In the Driver selection box, you can select the driver. Please select the USB device
here. By default, Logic works with 16bit recording and playback resolution which is OK for
15
Downloaded from www.Manualslib.com manuals search engine