Making/Answering/Ending Calls - Avaya AWH75 Anleitung

Making/Answering/Ending Calls

Setup 1, 2, 3 & 4
To make a call, press call control button. Dial tone should sound through headset
(If not, check compatibility—see Setup 1, 2, 3 & 4). Dial using the telephone keypad.
To answer a call, press the call control button on the headset.
To end a call, press the call control button on the headset. If either you or the recipient
have trouble hearing, please check compatibility (Setup 1, 2, 3 & 4).
12
Downloaded from www.Manualslib.com manuals search engine
Making/Answering/Ending Calls
Setup 5
with Optional Handset Lifter
First, test proper set up of the handset lifter.
1. Press the call control button on headset to activate handset lifter and lift handset
from phone. Dial tone should sound if the handset is raised high enough.
2. If no dial tone, adjust handset lifter height switch or reposition the lifter under the
handset.
Use mounting tape to secure the handset lifter in position.
To make/answer a call:
1. Press the call control button to raise the handset lifter.
2. Use the telephone keypad to dial the number.
To end a call, press the call control button to lower the handset lifter. The handset will
return to the base.
If either you or the recipient have trouble hearing, please check compatibility (page 14).
13