Herunterladen Diese Seite drucken

Pego ECP PLUSR EXPERT DL3 Bedienungsanleitung Seite 42

Werbung

ECP PLUSR EXPERT DL3
ERSATZTEILE UND ZUBEHÖR - SPARE PARTS AND ACCESSORIES
Ersatzteile und Zubehör für.
DL3
BESCHREIBUNG
Ersatzteile; elektronische Platine für
den ECP PLUSR EXPERT DL8
Gelber NTC Fühler 10K 1%
LÄNGE =3m
Pufferbatterie
Bluetooth Modul
Bluetooth Drucker
Ersatzteile müssen bei Ihrem Händler angefordert
werden.
REINIGUNG DES REGLERS - CLEANING THE CONTROLLER
Verwenden Sie für die externe Steuerung des Reglers nur
Wasser und neutrale Reinigungsmittel.
Der ECP PLUSR EXPERT DL3 besteht aus Kunststoff,
Kabeln, Leiterplatten und elektrischen Komponenten. Aus
diesem Grund muss das Gerät nicht umweltgereicht
entsorgt werden. Alle diese Teile sind nach den örtlichen
Bestimmungen zu entsorgen. Wenn die Batterie ersetzt
wird, muss sie ordnungsgemäß entsorgt werden.
INSTALLATIONS –UND BEDIENUNGSANLEITUNG
Pag. 42
USE AND MAINTENANCE MANUAL
ECP PlusR 200 Expert
DESCRIPTION
SPARE PART ELECTRONIC
CARD FOR PLUS EXPERT DL8
YELLOW NTC PROBE 10K 1%
LENGHT=3m
Backup battery
Bluetooth module
Bluetooth printer
ENTSORGUNG - DISPOSAL
Anhang / Appendices
Spare parts and accessories for
PEGO COD.
200SCHPLUSRDL3
SONNTC3MCE
ACC12VNIMH
SCHBTH
STAMY-A
Spare parts must be requested to your distributor.
Use only neutral detergents and water for the external
clenanng of the controller
The PLUS EXPERT DL3 is composed by plastic, cables,
printed circuit and electrical components; for this reason it
has not to be disposal in the environment.
All these parts shuld be disposed of according to local
standards on waste disposal.
If the battery is replaced make sure it is disposed of
properly at an authorised waste
collection facility.
Rev. 16-12
8.2
200P200RDL3
PEGO COD.
8.3
8.4

Werbung

loading