GCC Technologies Elite XL Bedienungsanleitung Seite 122

Kapitel 6
Symptom:
Data sent to printer
Data sent to printer
Press the ON-LINE button to
Press the ON-LINE button to
take the does not print, but
take the does not print, but
printer off-line, then press the
printer off-line, then press the
FORM FEED DATA PRESENT
FORM FEED DATA PRESENT
button to eject the final page or
button to eject the final page or
send the message appears.
send the message appears.
Form feed code (decimal
Form feed code (decimal
character 12). Last page of
character 12). Last page of
Press the ON-LINE button to
Press the ON-LINE button to
take the does not print, but
take the does not print, but
printer off-line, then press the
printer off-line, then press the
FORM FEED DATA PRESENT
FORM FEED DATA PRESENT
button to eject the final page or
button to eject the final page or
send the message appears.
send the message appears.
Form feed code (decimal
Form feed code (decimal
6-16 Kapitel 6
Wartung und Fehlerbehebung
Ungenügende Tonerhaftung.
Reason
Moisture in paper.
Paper does not meet specification
The printer access door is not fully
closed.
Action to take
Use fresh, dry paper.
Use recommended paper (see
Appendix B).
Close the printer access door. Make
sure the cover latch is secured.