Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INPUT CONNECTION
Connect any devices to auxiliary input IN1. The Input is referred to ground (-) and can be programmed as NC,
NO, Balanced and Double-balanced.. The Input can manage fast signals from seismic detectors or rolling
shutters; in such case it should be connect as NC type. To implement connections with balancing, use
(provided) 2,7 kohm resistances with 1% tolerance.
NC connected
to negative
KEYPAD
DETECTOR
WARNING: "Double balance" is the only EN50131 compliant connection mode. Refer to the manuals of
1067 units for further, more detailed information.
TECHNICAL CHARACTERISTICS
Nominal supply voltage (taken in from control panel via bus) .......................................................... 13,8 Vcc
Operating voltage of the keypad .......................................................................................... 10 Vdc ÷15 Vdc
Rated current at 12 Vdc:
In standby mode, only LED presence network .................................................................................... 32 mA
medium consumption with backlight, at lev. 1 ..................................................................................... 68 mA
medium consumption with backlight, at lev. 4 ................................................................................... 110 mA
maximum peak consumption ............................................................................................................ 200 mA
Total max length of the line Bus Control panel-Peripherals ................................................................. 400 m
Communication type ..................................................................................................... serial Urmet protocol
Memory type for the programming maintenance ..................................................................... DATA FLASH
Memory type for the vocabulary maintenance ......................................................................... DATA FLASH
Operating temperature............................................................................................................ -10°C +40°C
Operating medium relative humidity ....................................................................................................... 75%
Storage temperature range ..................................................................................................... -20°C +60°C
Housing protection degree ........................................................................................................... IP40 / IK06
Weight ................................................................................................................................................. 460 g
Dimensions (W x H x D) .............................................................................................. 160 x 130 x 23,5 mm
WARNING:
1)
Detailed and complete information is contained in the installation, programming and user manuals of
the 1067 Control panel on the CD ROM supplied or downloaded directly from website
2)
DO NOT OPEN THE KEYPAD BOX; all operations necessary for product installation and
maintenance do not require interventions inside it.
3)
The product type (capacitive soft-touch keys) calls for the utmost care when cleaning the glass front side.
To ease this operation, a function key (T4 key) has been provided which blocks the key functions for a
preset time of 30 seconds thus enabling the cleaning operations. Time will be struck on the display.
DS1067-058
NO connected
to negative
SINGLE BALACING INPUT
KEYPAD
DETECTOR
KEYPAD
DETECTOR
DOUBLE BALACING INPUT
EN50131
KEYPAD
DETECTOR
www.urmet.com
7
Werbung
Inhaltsverzeichnis
