Alerts - VOSS.farming impuls duo DV 40 Bedienungsanleitung

Under the letter „U", select the interval for updating the data of your energiser. An empty
round arrow is an interval of 1 minute. A round arrow with an „i" in the middle is an interval
of 1 hour (this consumes less energy and keeps your battery longer). For a manual update,
press „i" on the remote control.
Lastly, you can set a limit for minimum voltage on the fence. As soon as the voltage falls
below it, an alarm is triggered on the remote control.

13. ALERTS

The alert will appear on the remote control as a flashing warning sign (the exclamation
point in the triangle). You will also hear a beep, as long as you have not muted it in the
settings.
No signal:
If the signal and warning signs are flashing, the signal is weak.
Low fence voltage:
If the voltage value flashes, the fence voltage is too low.
Electric fence battery charge low:
If the battery and alarm symbols are flashing, the battery is empty.
General alert:
If only the alarm symbol is flashing, there may be several possible causes for this. For
example, if there was a rapid change to the fence voltage, for example an animal, person
or a tree touches the fence.
To turn off the warning sound, press the alert button (11). The sound can also be switched
off completely in the settings. If you have fixed an error, press the alert button and the
error message will be deleted.
40
41405 | 12 | 2020 | V2