Makita HR5201C Bedienungsanleitung Seite 5

Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 3 m/s
For Model HR5210C
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
Uncertainty (K) : 2.5 m/s
Work mode : chiseling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 2 m/s
For Model HR5211C
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiseling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 2 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
Downloaded from www.Manualslib.com
2
) : 19.5 m/s
h,HD
2
) : 99 dB(A)
pA
) : 110 dB(A)
WA
Wear ear protection
total value (tri-axial vector
2
) : 12 m/s
h,CHeq
2
2
) : 9.5 m/s
h,CHeq
2
2
) : 17 m/s
h,HD
2
) : 100 dB(A)
pA
) : 111 dB(A)
WA
Wear ear protection
total value (tri-axial vector
2
) : 11 m/s
h,CHeq
2
2
) : 8 m/s
h,CHeq
2
2
) : 12.5 m/s
h,HD
2
manuals search engine
ENG303-2
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG102-3
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG216-2
For European countries only
sum)
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
ENG306-1
Rotary Hammer
Model No./ Type: HR5201C,HR5210C,HR5211C
are of series production and
ENG303-2
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
ENG102-3
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
ENG216-2
000230
sum)
ENG306-1
General Power Tool Safety
Warnings
ENG303-2
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
ENG901-1
serious injury.
Save all warnings and instructions for
future reference.
5
Corporation as the responsible
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
ENH101-13
GEA010-1