Cleaning; Technical Information - Exsys EX-6006PoE Anleitung

EX-6006PoE
4. Hardware Installation
2. Connect the RJ45 network cable to the data input connector.
3. Now connect the power connector of theincluded power supply with the DC-Connector
or the optional power supply to the terminal block of the injector and plug the power
plug of the power supply nto an electrical outlet.
4. Now connect your PoE-PD device to the PoE connector. The yellow PoE Power LED
should light up when the PD is correctly detected and powered by the EX-6006PoE.

5. Cleaning

For cleaning please use only a dry fluff less cloth and remove the dirt with gently pres-
sure. In the area of the connectors please make sure that no fibres from the cloth re-
main in the connectors. Attention! Never use a moist or wet cloth for cleaning!

6. Technical Information

Data Transfer Rate:
Connectors:
Hardware System:
Operating System:
Operating Temperature:
Storage Temperature:
Rel. Humidity:
Protection Class:
Power:
Size:
Weight:
© Copyright 2020 by EXSYS Vertriebs GmbH. All Rights Reserved
10/100/1000Mbit/s
1x RJ45 LAN Port, 4x RJ45 PoE Port,
1x +12V Terminal Block, 1x +12 DC-Connector
Ethernet 10/100/1000Mbit/s
All Operating Systems
32°F to 140°Fahrenheit
-40°F to 185°Fahrenheit
5% bis 95%
IP30
+12 Volt
114,50 x 57,25 x 26,00 mm
300g
11
English