Cleaning And Care; Troubleshooting - Hama BASIC S7A Bedienungsanleitung

5. Cleaning and Care

6. Troubleshooting

Error
The cutting rollers do
not turn on briefly even
though you slide the
operating switch (2) to
„Auto".
If it has not been used
for a long time, the
device switches off and
cannot be switched
back on.
Basic S7A
Downloaded from www.Manualslib.com
Clean the unit with a dry cloth. In case of heavy soiling, the cloth may
be moistened a bit.
DANGER
Danger of death due to electrical current
► Remove the mains plug from the electrical socket before
cleaning the device.
WARNING
Risk of cutting injury from rollers of the cutting attachment!
Observe the following safety instructions to avoid injury:
► Do not touch the cutting rollers
CAUTION!
Moisture can damage the device!
► To prevent irreparable damage, make sure that no moisture gets
into the device when you clean it.
Possible cause
The connection cable
(3) is not connected
correctly.
No mains power
Device is faulty.
The device is overhe-
ated
manuals search engine
Solution
Ensure that the mains
plug is plugged into the
socket.
Check your fuse box.
Inform our customer
service department.
Switch the device off
and let it cool off for at
least 25 minutes.
g
11