Maintenance - Bissell EV675 Benutzerhandbuch

Maintenance

1
Press the button on top of the Dust Bin
and pull to remove.
3
Remove the filter cover, followed by the
Foam and Pleated Filters.
5
Rinse Dust Bin. Allow to dry for 24H.
7
Pinch the tabs on the Brush Guard inward
and pull to remove. Lift to remove the
Brush Roll.
9
Replace the Brush Roll and Brush Guard.
2
Open filter door by pulling both sides
apart. Empty the debris from the Dust Bin.
4
Use the Cleaning Tool to brush the filter
cover and filters. Do not wash the filters.
6
24h
Reinstall the filters and filter cover, close
and push back into the unit.
8
10
Use the Cleaning Tool to brush dust
off sensors.
Clean the Brush Roll with the
Cleaning Tool.
7