Bissell EV675 Benutzerhandbuch Seite 9

Status Light and Error Notifications
Status Light Color
Breathing Blue
Power Light Off
Solid Blue
Flashing Blue
Flashing Red
Solid Red
Status
Error Notification
Light Color
Flashing Red One beep
Flashing Red Two beeps
Flashing Red
Three beeps
Flashing Red
Four beeps
Solid Red One beep
Solid Red
Two beeps
Solid Red Three beeps
Solid Red Four beeps
Status
Charging
Robot fully charged
Cleaning
Returning to Docking Station
Error: Check Cliff Sensors, Battery Power Low, Robot is Trapped
Error: Check Wheels, Edge Cleaning Brushes, Brush Roll, and Bumper
Possible Cause
Cliff Sensors are dirty.
Low power.
Robot is trapped.
Low suction.
Wheels are stuck.
Edge Cleaning Brushes are
stuck.
Brush Roll is stuck.
Bumper is stuck.
Remedies
Clean the Cliff Sensors with a dry
cloth.
Charge the robot battery.
Turn OFF the robot and move to a new
location.
Empty the Dust Bin and remove hair
and debris from suction inlet and
filters.
Turn OFF the robot and remove hair
and debris from wheels.
Turn OFF the robot and remove
hair and debris from Edge Cleaning
Brushes.
Turn OFF the robot and remove hair
and debris from Brush Roll.
Turn OFF the robot and tap the
Bumper several times to release any
debris that may have accumulated.
9