Pkm WT 10+6 Bedienungsanleitung Seite 104

If spin speed « 0 » has been selected, the final spin speed will be cancelled. Before
the programme ends, the appliance only drains the water.
In some washing programmes the settable spin speed is limited: see also chapter
4.2.1 P
ROGRAMMES
The function « S
4.2.1 P
ROGRAMMES
F : « T
UNCTION
❖ The temperature of several washing programmes can be selected individually
(up to the maximum allowed temperature of the selected programme).
❖ Each washing programmes includes a default temperature.
➢ To set the temperature of a washing programme individually, press the button
« T . » repeatedly until the desired washing temperature is indicated on the
EMP
display.
If the temperature « 00 » is indicated, the appliance washes with cold water.
In some washing programmes the settable temperature range is limited: see also
chapter 4.2.1 P
The function « T
4.2.1 P
ROGRAMMES
F
UNCTION
❖ Using the function « T
❖ Set the washing/drying programme and the desired additional function first and
then activate the function « T
You can choose a delay period from 1 hour to 24 hours.
1. Set the desired programme using the rotary knob. Set the desired additional
functions using the corresponding buttons.
2. Press the buttons « T
desired delay period is indicated on the display.
The programmable delay periods are from 1 hour (min.) to 24 hours (max.).
3. Press the button « S
:
AVAILABLE ADDITIONAL FUNCTIONS
» may not be available for all programmes: see also chapter
PEED
:
AVAILABLE ADDITIONAL FUNCTIONS
. » =
EMP SELECTION OF THE WASHING TEMPERATURE
:
ROGRAMMES AVAILABLE ADDITIONAL FUNCTIONS
. » may not be available for all programmes: see also chapter
EMP
:
AVAILABLE ADDITIONAL FUNCTIONS
: « T » =
IMER
», you can set a delayed programme start.
IMER
IMER
. » and « D
EMP
/ P
TART AUSE
DELAYED PROGRAMME START
» using the corresponding buttons.
» (= T
RY IMER
» when having set the delay period.
~ ~
104
.
.
.
.
) simultaneously until the