Pkm WT 10+6 Bedienungsanleitung Seite 102

4. Set a suitable drying programme using the
« D ».
RY
5. The appliance is now switched on and in
6. The indicates the default duration of the programme (hours : minutes)
DISPLAY
7. Press the button « D
minutes) is indicated on the display.
8. Press the button « S
9. When the programme is finished, an acoustic signal sounds; see also chapter 4.3.3
S
ELECTION OF THE ADDITIONAL FUNCTIONS
10. When the programme is finished, always turn the rotary knob for the programme
selection back to « O
11. Close the water tap.
H
OW TO SET AND START A COMBINED PROGRAMME
1. Put the laundry to be washed in the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the water tap.
4. Set a programme suitable for the laundry to be washed using the
e.g. programme « C
5. The appliance is now switched on and in
6. The indicates the default duration of the programme (hours : minutes)
DISPLAY
7. Additionally, to the selected programme further functions such as temperature,
spin speed, delay, etc. can be selected by pressing the corresponding buttons; s.
chapter 4.3.3 S
8. Press the button « D
minutes) is indicated on the display.
9. Press the button « S
10. The door lock is activated automatically.
11. The operational status indicator of the door lock «
12. When the programme is finished, an acoustic signal sounds; see also chapter 4.3.3
S
ELECTION OF THE ADDITIONAL FUNCTIONS
13. The door lock is released after approx. 2 minutes.
14. The operational status indicator of the door lock «
15. When the programme is finished, always turn the rotary knob for the programme
selection back to « O
16. Close the water tap.
Depending on model.
27
Depending on model.
28
» repeatedly until the desired drying time (60 - 330
RY
/ P
TART AUSE
» to switch off the appliance completely.
FF
».
OTTON
ELECTION OF THE ADDITIONAL FUNCTIONS
» repeatedly until the desired drying time (60 - 330
RY
/ P
TART AUSE
» to switch off the appliance completely.
FF
ROTARY KNOB
STANDBY MODE
» to start the set programme.
/ F
UNCTION
STANDBY MODE
» to start the set programme.
/ F
UNCTION
~ ~
102
: e.g. programme
.
: « A
COUSTIC SIGNAL
( & )
WASH DRY
ROTARY KNOB
.
.
» goes on.
: « A
COUSTIC SIGNAL
» goes off.
27 .
».
:
28 .
».