Washing Instructions - Cam Linea Handbuch

INSTRUCTIONS FOR USE
housing. To remove the bumper bar, turn
outwards parts "Y" and take it off.
20. To fit the hood, insert the parts "S" into the
housing "T" situated on both the armrests.
21. To remove the hood, push on the buttons
positioned on part S, and slide off as illustrated.
22. ADJUSTING THE BACKREST: pull the handle
"E" upwards and adjust the backrest until you
reach the desired position.
23. ADJUSTING THE FOOTREST: To lower the
footrest raise lever F (Part b) and at the same time
push downwards on the footrest.
FITTING THE LEG COVER (OPTIONAL)
24. Pass the leg cover under the bumper bar and
attach the press studs to secure.
25. FOLDING THE PUSHCHAIR – WITH SEAT
UNIT IN REAR FACING POSITION:
25a. recline completely the backrest as shown in
the picture.
25b. Recline completely the canopy as shown in
the picture.
25c. Pull levers "C" and push the handle forward.
25d. Press buttons "B" located on both sides of the
handle to fold the product completely.
Remove the bumper bar for a more compact
folding.
26.
12-36 MONTHS,
USING THE SEAT FORWARD FACING:
It is advisable to use the pushchair seat unit in the
forward facing position when the child is between 12
– 36 months.
Unfasten the buttons.
Grab the handles "F", place the seat unit on the
frame as shown in the picture and push
downwards until you hear a "click". Fasten the
flaps.
ATTENTION! Do not fit/release the seat unit when
the baby is seated.
27. FOLDING THE PUSHCHAIR – WITH SEAT
UNIT IN FORWARD FACING POSITION:
27a. recline completely the backrest as shown in
the picture
27b. recline completely the canopy as shown in
the picture
27c. pull levers "C" and push the handle forward.
32. SPARE PARTS:
N° DESCRIPTION
1 Instruction manual
2 Basket
3 5 point harness
4 Raincover
5 Armrest plastic cap
6a Armrest right
6b Armrest left
11 Button to adjust handle
13a Handle - Classy version
13b Handle
16a Wheel – Classy version
16b Wheel
17a Inner tube – Classy
version
28
27d. Press buttons "B" located on both sides of the
handle to fold the product completely.
Folding the pushchair with the seat unit forward
facing makes the product more compact than in
rear facing position.
27e. By removing wheels, seat unit and canopy,
the frame is even more compact.
27f. ATTENTION: NEVER carry the pushchair
when the baby is seated.
28. HOW TO FIT THE RAINCOVER (OPTIONAL)
29. MAINTENANCE: Improper use of this
pushchair, on particularly dusty or dirty terrain
may cause a malfunction with in the product,
(opening and folding of the chassis, may not be
as fluid, the front swivel wheel system may not
be easily manoeuvrable...) It will be necessary
to clean
thoroughly, and finally spray all working parts
with a silicone spray. Pay particular attention
to the parts highlighted in figures a, b, & c.
Your pushchair will require regular maintenance
to avoid problems from everyday use. Do not leave
your pushchair out in prolonged exposure to
direct sunlight, as this may cause colours to fade
and plastics to soften and become damaged. Do
not fold your pushchair when damp. All moving
parts should be regularly lubricated with silicone
spray. Replace any broken or damaged parts.
Should your pushchair be used on a beach, ensure
that all
mechanisms and wheels) are cleaned thoroughly
of any sand or salty residue.
30. Regularly check if wheels have been pumped
at 2.0 bar.

31. WASHING INSTRUCTIONS

Hand wash only in warm water (max
30°), with a mild detergent. Do not
wash in a washing machine. Do not
tumble dry. Do not bleach. Leave to
dry on a flat surface away from direct
sunlight.
N° DESCRIPTION
17b Inner tube
18 Rear wheel group
with brake unit
19 Fabric seat unit
21 Seat unit
24 Footmuff
25 Fabric hood
27 Canopy frame
28 Bumper bar
29 Bag
30a Naked chassis – Classy
version
30b Naked chassis
50 Inner fabric part
with a damp cloth,
mechanical parts (opening/closing
N° DESCRIPTION
50a Carrycot external
base cover - Optional
51 Mattress
52 Apron
53 Canopy fabric
54 Canopy frame
55 Rocking base
56 Backrest adjusting
mechanism
57 quicky system
mechanism
58 Backrest
59 Backrest adjuster
then dry