Eds 3000 With Thin Film Dms Sensor Cell; Relative Pressure - HYDAC EDS 3000 Bedienungsanleitung

EDS 3000 IO-Link
17.2 EDS 3000 WITH THIN FILM DMS SENSOR CELL;
RELATIVE PRESSURE STARTING AT 40 BAR
Input data
Measuring Ranges
Overload range
Burst pressures
Mechanical connection
Torque value
Parts in contact with fluid
Output data
Output signals
Accuracy to DIN 16086
Max. setting (display, analogue output)
Repeatability
Temperature drift
Analogue output
Signal
Switching outputs
Version
Switching current
Switching cycles
Reaction time
Long term drift
Parameterisation
Ambient conditions
Compensated temperature range
Operating temperature range
Storage temperature range
Fluid temperature range
mark
Vibration resistance according to
DIN EN 60068-2-6 (0 .. 500 Hz)
Shock resistance according to
DIN EN 60068-2-29 (11 ms)
Protection class to IEC 60529
Edition: 2014-11-06
40; 100;
80; 200;
200; 500;
G1/4 A ISO 1179-2 (DIN 3852)
Threaded port DIN 3852-G1/4
20 Nm
Mechanical connection: Stainless steel
Sensor cell: Stainless steel
Seal: FPM
Output 1: PNP transistor output
Output 2: can be configured as PNP transistor
switching output or as analogue output
≤ ± 0.5 % FS typ.
≤ ± 1 % FS max.
≤ ± 0.25 % FS max.
≤ ± 0.025 % FS / °C max. zero point
≤ ± 0.025 % FS / °C max. range
selectable:
4 .. 20 mA
0 .. 10 V
PNP transistor output
Programmable as N/O or N/C
SP1: max. 0.1 A
SP2: max. 0.25 A
> 100 million
< 10 ms
≤ ± 0.3 % FS typ. / year
Via IO-Link interface, see chap. 7
or push buttons on the EDS 3400
-10 .. +70 °C
-25 .. +80°C
-40 .. +80 °C
-25 .. +80 °C
EN 61000-6-1 / 2 / 3 / 4
≤ 10 g
≤20 g
IP 67
HYDAC ELECTRONIC GMBH
250; 400; 600 bar
500; 800; 1000 bar
1000; 2000; 2000 bar
ohmic resist. max. 500 Ω
load resistance min. 1 kΩ
Part No.: 669897 E
19