Technical Description; Installing The Seat Heater - Waeco MagicComfort MSH200 Montage- Und Bedienungsanleitung

MagicComfort MSH200
5
The heating elements for the MagicComfort MSH200 seat heater can be
installed in the driver's seat and the passenger seat.
The shape of the seat is not altered by the heating elements.
The seat heater is operated using a switch.
6
6.1
For installation and assembly you will need the following tools:
 Drill bit set (1)
 Drill (2)
 Screwdriver (3)
 Set of ring or open-ended spanners (4)
 Measuring ruler (5)
 Hammer (6)
 Centre punch (7)
To make and test the electrical connection, the following tools are required:
 Diode test lamp (8) or voltmeter (9)
 Crimping tool (10)
 Insulating tape (11)
 Hot air blower (13)
 Soldering iron (14)
 Solder (15)
 Cable bushing sleeves (if necessary)
To fasten the cables you may require additional cable binders.
Downloaded from www.Manualslib.com

Technical description

Installing the seat heater

Tools required (fig. 1, page 2)
manuals search engine
Technical description
21