MagicComfort MSH200
7
I
➤ Adjust the seat heating from 0 to H (high output) using the rotary wheel of
the accompanying switch.
✓ The LED (fig. k 2, page 6) on the switch lights up green.
➤ To switch the seat heater off: Turn the corresponding switch to position 0.
✓ The LED (fig. k 2, page 6) on the switch goes out.
8
The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
9
➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
M
Downloaded from
www.Manualslib.com
Using the seat heater
NOTE
The seat heating logo (fig. k 1, page 6) also lights up when the
seat heating is switched on.
Guarantee
Disposal
If you wish to finally dispose of the product, ask your local recycling
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
manuals search engine
Using the seat heater
25