Safety Instructions For Maintenance - Husqvarna LC 137i Bedienungsanweisung

• Do not charge non-
rechargeable batteries in the
battery charger.
• Do not use the battery charger
near flammable materials or
materials that can cause
corrosion. Do not cover the
battery charger. Pull out the
plug to the battery charger if
there is smoke or fire.
• Do not use a defective or
damaged battery charger.
• Only charge the battery
indoors in a room with good
airflow and away from
sunlight. Do not charge the
battery in wet conditions.
Safety instructions for
maintenance
WARNING: Read the
warning instructions that
follow before you use the
product.
• To prevent accidental start
during maintenance, turn the
safety key to 0 and remove the
battery. Wait at minimum 5
seconds before you start the
maintenance.
• Do the maintenance work
correctly to increase the
lifetime of the product and
decrease the risk of accidents.
1574 - 002 - 08.12.2020
Let an approved service agent
do the professional repairs.
Speak to your nearest service
agent for more information.
• Only do the maintenance work
written in this operator's
manual. More extensive work
must be done by an approved
service agent.
• Put on heavy duty gloves
when you use the cutting
equipment. The blade is very
sharp and cuts can easily
occur.
• Keep the cutting edges sharp
and clean for the best and
safest performance.
• Let your service agent
regularly examine the product
and make necessary
adjustments and repairs.
• Replace damaged, worn or
broken parts.
• Obey the instructions for how
to change accessories. Only
use accessories from the
manufacturer.
• When not in operation, keep
the product, battery and
battery charger apart in a dry,
indoor and locked area. Make
sure that children and persons
that are not approved cannot
get access to the product,
battery or battery charger.
15