Function Settings; Language Setting; Video Setting - AEG DVD 4603 HC Bedienungsanleitung, Garantie

FUNCTION SETTINGS

Language setting

1. Press the FUNCTION button until DVD appears on
the display.
2. Press the STOP button so that no disc is playing.
3. Press the SETUP button. The menu appears on the
screen.
4. Use or cursor button to select the Language, then
press the ENTER button.
5. Once these settings have been made press the
Return button to return to the normal screen.
STEP 4
STEP 5

VIDEO setting

Video Output
1. Press the SETUP button.
2. Use or button to select Video, then press the
ENTER button.
3. Use or button to select Video Output, then press
the ENTER button.
4. Use or button to shift and select the signal, then
press the ENTER button.
5. To exit the FUNCTION SETUP MENU and return to
the normal screen, press the RETURN button.
STEP 2
5....-05-DVD 4603 HC AEG_GB 43
STEP 3
STEP 4
Note:
CVBS: Corresponding to your TV which has a video or
S-video input.
YUV: Corresponding to your TV which has a YUV
input. S-video may not have video signal.
RGB: ONLY use in Europe.
Attention:
Always set Video Output in CVBS, otherwise, the
picture on the TV may be distorted. If this occurs, and
you cannot see the screen, press the P. SCAN button
(depending on the type of device are changes only in the
SETUP-menu/Video possible) repeatedly until the 'CVBS'
displays. Display may fail to show 'CVBS' in case there
is no disc or disc tray is being opened.
TV Shape
1. Press the SETUP button.
2. Use or button to select Video, then press the
ENTER button.
3. Use or button to select TV Shape, then press
the ENTER button.
4. Use or button to shift and select the TV type,
then press the ENTER button.
5. To exit the FUNCTION SETUP MENU and return to the
normal screen, press the RETURN button.
STEP 2
43
16.04.2004, 9:22:40 Uhr