Brightness; Edges - AEG DVD 4603 HC Bedienungsanleitung, Garantie

STEP 3
STEP 4
Cut of when a wide-screen
video image is played
Notes :
• The displayable picture size is preset on the DVD
disc. Therefore the playback picture of some DVD
discs may not conform to the picture size you select.
• When you play DVD discs recorded in the 4:3 picture
size only, the playback picture always appears in the
4:3 picture size regardless of the TV shape setting.
44
5....-05-DVD 4603 HC AEG_GB 44
4:3 Pan Scan
• When wide-screen video
material is played, this
mode clips the right and
left sides of the image so
that it can be viewed on a
conventional screen.
• Some wide-screen DVDs
that do not permit Pan
Scan mode playback are
automatically played in
letterbox mode (black
bands top and bottom).
4:3 Letter Box
• When wide-screen video
material is played in this
mode on a conventional
screen, black bands
appear at the top and
bottom of the screen.
16:9 Wide-screen
• This is the correct mode
for playing wide-screen
videos on a widescreen.
• You must also set the
screen mode on your
wide-screen TV to
„FULL".
• If you select 16:9 wide-screen mode and you own a
4:3 TV set, the DVD playback picture will be horizon-
tally distorted during playback. Images will appear to
be horizontally compressed. Always be sure that your
TV shape conforms to the actual TV in use.

Brightness

1. Press the SETUP button.
2. Use or cursor button to select Video, then press the
ENTER button.
3. Use or cursor button to select Brightness, and then
press the ENTER button.
4. Use or cursor button to shift and select the Off/On,
then press the ENTER button.
5. If you want to exit the SETUP MENU and return to
the normal screen, press the RETURN button.
STEP 2
STEP 3
STEP 4
On: Picture will be brighter to clarify details.
Off: Picture will have deepened colors.

Edges

1. Press the SETUP button.
2. Use or cursor button to select Video, then press the
ENTER button.
3. Use or cursor button to select Edges, and then press
the ENTER button.
4. Use or cursor button to shift and select the Sharpen /
Soften / Off, then press the ENTER button.
16.04.2004, 9:22:41 Uhr