Disc Formats; Using The Remote Control; Battery Replacement - AEG DVD 4603 HC Bedienungsanleitung, Garantie

DISC FORMATS

The unit can playback.
DVD's
[8cm/12cm disc]
Audio-CD's
[8cm/12cm disc]
Region Management Information
This unit is designed and manufactured to respond to
the Region Management Information that is encoded on
DVD discs. If the Region number printed on the DVD disc
does not correspond to the Region number of this unit,
this unit cannot play that disc.
The region number of this unit is 2.
Disc Function or Operation that is Not Available
When the symbol appears on the screen, it indicates
that the function or operation attempted is not available
at that time. This occurs because the DVD disc manufac-
turer determines the specifi c functions. Certain functions
may not be available on some discs. Be sure to read the
documentation provided with the DVD.
Icons Used on DVDs
Sample lcons
Notes:
• This Unit supports 2-channel (L/R) audio and 5.1ch
(Multi-channel) MPEG Audio 1/2 (only when the DIGI-
TAL AUDIO OUT coaxial jack is used for connection).
It does not support 7.1 channel MPEG Audio Version
2.0.
• When playing back a CD-G (Graphics) or CD EXTRA
disc, the audio portion will be played, but the graphic
images will not be shown.
Title, Chapter and Tracks
• DVDs are divided into "titles" and "chapters". If
the disc has more than one movie on it, each movie
would be a separate "title". "Chapters" are sections
of titles.
28
5....-05-DVD 4603 HC AEG_GB 28
Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
• Audio CDs are divided into "tracks". A "track" is
usually one song on an Audio CD.
Note:
• Numbers identify each title, chapter, and track on a
disc. Most discs have these numbers recorded on
them, but some do not.
Notes on Unauthorized Discs
You may not be able to play back some DVD discs
on this unit if they were purchased from outside your
geographic area or made for business purposes.
BEFORE THE START

Using the Remote Control

• Point the Remote Control at the REMOTE SENSOR
located on the unit.
• When there is a strong ambient light source, the
performance of the infrared REMOTE SENSOR may
be degraded, causing unreliable operation.
• The recommended effective distance for remote
operation is about 16 feet (5 meters).
Inserting the Batteries

BATTERY REPLACEMENT

When battery become weak, the operating distance of
the Remote Control is greatly reduced and you will need
to replace the battery.
NOTE:
• If the Remote Control is not to be used for a long
time, remove the battery to avoid damage caused by
battery leakage corrosion.
• WARNING: Do not dispose of batteries in fi re, batte-
ries may explode or leak.
• Do not mix old and new batteries. Do not mix
ALKALINE, standard (Carbon-Zinc) or rechargeable
(Nickel-Cadmium) batteries.
1. Open the battery cover
to the back of the
remote control.
2. Place two AA size
batteries into the
compartment. Observe
the +/- polarity.
3. Close the cover of the
battery compartment.
16.04.2004, 9:22:31 Uhr